LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> FX50 >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System (VK50VE) - DTC U0101, U0113, U1003, U1001, U1024 & P0011 Through P0159 >> DTC U1024: Can Comm Circuit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    TESTING CONDITION: 

    Before performing the following procedure, confirm that battery voltage is more than 10 V at idle. 

    GO TO  2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 3 seconds.
    2. Check DTC.

      Is DTC detected? 

      YES: Go to DIAGNOSIS PROCEDURE .

      NO: INSPECTION END

scientia non olet · About LEMON Manuals