LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> FX35 AWD >> Labor Times >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All1.8B
Front,Both Sides1.0B
Rear,Both Sides1.0B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed Brake System.
Each Additional0.2B
One0.3B
Combination Procedure: CALIPER: Overhaul:
Includes: Bleed Brake System.
Front,One0.7B
Rear,One0.5B
Combination Procedure: CALIPER: Replace:
Includes: Bleed Brake System.
One0.3B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,EachCorrect Rotor lateral runout by indexing or correction plate.0.2B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Each Side0.4B
Combination Procedure: WHEEL BEARING: Replace:
AWD, Front,Hub Assembly,OneDOES NOT include wheel alignment.0.4B
Rear,Hub Assembly,OneIncludes: R&I Knuckle Assembly. DOES NOT include wheel alignment.2.3B