LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> EX35 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock >> Component Diagnosis >> Door Switch >> Component Inspection

Component Inspection

  1. CHECK DOOR SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect door switch connector.
    3. Check door switch terminals.
      CONTINUITY REFERENCE

      Door switch Condition Continuity
      Terminal
      Each door 2 Ground part of door switch Door switch Pressed Not existed
      Released Existed
      Back door 3 4 Pressed Not existed
      Released Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO-1: Replace malfunction door switch. Refer to "REMOVAL AND INSTALLATION ".

      NO-2: Replace back door lock assembly. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals