Physical Values

UNIFIED METER AND A/C AMP CONNECTOR TERMINALS REFERENCE CHART

Terminal No. (Wire color)		Description		Condition		Value (Approx.)
+	-	Signal name	Input/Output	Condition		Value (Approx.)
5 (L)	Ground	Manual mode shift up signal	Input	Ignition switch ON	Selector lever UP operation	0 V
5 (L)	Ground	Manual mode shift up signal	Input	Ignition switch ON	Other than the above	12 V
7 (GR)	Ground	Communication signal (AMP. → METER)	Output	Ignition switch ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
8 (L)	Ground	Vehicle speed signal (2-pulse)	Output	Ignition switch ON	Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)]	NOTE: The maximum voltage varies depending on the specification (destination unit). Courtesy of NISSAN MOTOR CO., U.S.A.
9 (SB)	Ground	Seat belt buckle switch signal (driver side)	Input	Ignition switch ON	When seat belt is fastened	12 V
9 (SB)	Ground	Seat belt buckle switch signal (driver side)	Input	Ignition switch ON	When seat belt is not fastened	0 V
10 (W)	Ground	Manual mode signal	Input	Ignition switch ON	Selector lever DS position	0 V
10 (W)	Ground	Manual mode signal	Input	Ignition switch ON	Other than the above	12 V
11 (G)	Ground	Not manual mode signal	Input	Ignition switch ON	Selector lever DS position	12 V
11 (G)	Ground	Not manual mode signal	Input	Ignition switch ON	Other than the above	0 V
14 (BR)	Ground	Communication signa.l(LCD → AMP.	Input	Ignition switch ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
25 (V)	Ground	Manual mode shift down signal	Input	Ignition switch ON	Selector lever down operation	0 V
25 (V)	Ground	Manual mode shift down signal	Input	Ignition switch ON	Other than the above	12 V
27 (LG)	Ground	Communication signal. METER → AMP.	Input	Ignition switch ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
28 (R)	Ground	Vehicle speed signal (8-pulse)	Output	Ignition switch ON	Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)]	NOTE: The maximum voltage varies depending on the specification (destination unit). Courtesy of NISSAN MOTOR CO., U.S.A.
30 (V)	Ground	Parking brake switch signal	Input	Ignition switch ON	Parking brake is applied	0 V
30 (V)	Ground	Parking brake switch signal	Input	Ignition switch ON	Parking brake is released	Courtesy of NISSAN MOTOR CO., U.S.A.
34 (Y)	Ground	Communication signal (AMP. → LCD)	Output	Ignition switch ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
41 (V)	Ground	ACC power supply	Input	Ignition switch ACC	-	Battery voltage
42 (Y)	Ground	Fuel level sensor signal	Input	Ignition switch ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
45 (P)	Ground	Ambient sensor signal	Input	-	-	Courtesy of NISSAN MOTOR CO., U.S.A.
53 (G)	Ground	Ignition signal	Input	Ignition switch ON	-	Battery voltage
54 (Y)	Ground	Battery power supply	Input	Ignition switch OFF	-	Battery voltage
55 (B)	Ground	Ground	-	Ignition switch ON	-	0 V
56 (L)	Ground	CAN-H	-	-	-	-
57 (W)	Ground	Brake fluid level switch signal	Input	Ignition switch ON	Brake fluid level is normal.	5 V
57 (W)	Ground	Brake fluid level switch signal	Input	Ignition switch ON	The brake fluid level is lower than the low level	0 V
58 (BR)	Ground	Fuel level sensor signal ground	-	Ignition switch ON	-	0 V
61 (BR)	Ground	Ambient sensor signal ground	-	Ignition switch ON	-	0 V
71 (B)	Ground	Ground	-	Ignition switch ON	-	0 V
72 (P)	Ground	CAN-L	-	-	-	-