LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> EX35 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> Ecu Diagnosis >> Combination Meter >> Reference Value >> Physical Values

Physical Values

COMBINATION METER CONNECTOR TERMINALS REFERENCE CHART

Terminal No. (Wire color) Description Condition Value (Approx.)
+ - Signal name Input/Output
1 (GR) Ground Battery power supply Input Ignition switch OFF - Battery voltage
2 (LG) Ground Communication signal. METER → AMP. Output Ignition switch ON -
G05223680Courtesy of NISSAN MOTOR CO., U.S.A.
3 (GR) Ground Communication signal (AMP. → METER) Input Ignition switch ON -
G05223680Courtesy of NISSAN MOTOR CO., U.S.A.
5 (B) Ground Ground - Ignition switch ON - 0 V
6 (P) Ground Alternator signal Input Ignition switch ON Charge warning lamp ON 0 V
Charge warning lamp OFF Battery voltage
7 (LG) Ground Air bag signal Input Ignition switch ON Air bag warning lamp ON 4 V
Air bag warning lamp OFF 0 V
10 (G) Ground Security signal Input Ignition switch OFF Security warning lamp ON 0 V
Security warning lamp OFF 12 V
15 (B) Ground Ground - Ignition switch ON - 0 V
16 (B) Ground Meter control switch ground - Ignition switch ON - 0 V
21 (O) Ground Ignition signal Input Ignition switch ON - Battery voltage
22 (B) Ground Ground - Ignition switch ON - 0 V
24 (BR) Ground Communication signal. LCD → AMP. Output Ignition switch ON -
G05223682Courtesy of NISSAN MOTOR CO., U.S.A.
25 (Y) Ground Communication signal (AMP.→ LCD) Input Ignition switch ON -
G05223680Courtesy of NISSAN MOTOR CO., U.S.A.
26 (R) Ground Vehicle speed signal (8-pulse) Input Ignition switch ON Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)]
NOTE: The maximum voltage varies depending on the specification (destination unit).
G05223684Courtesy of NISSAN MOTOR CO., U.S.A.
27 (V) Ground Parking brake switch signal Input Ignition switch ON Parking brake is applied 0 V
Parking brake is released
G05223673Courtesy of NISSAN MOTOR CO., U.S.A.
28 (W) Ground Brake fluid level switch signal Input Ignition switch ON Brake fluid level is normal. 5 V
The brake fluid level is lower than the low level 0 V
29 (SB) Ground Seat belt buckle switch signal (driver side) Input Ignition switch ON When driver seat belt is fastened 12 V
When driver seat belt is unfastened 0 V
30 (G) Ground Seat belt buckle switch signal (passenger side) Input Ignition switch ON
  • When getting in the passenger seat
  • When passenger seat belt is fastened
 12 V
  • When getting in the passenger seat
  • When passenger seat belt is unfastened
 0 V
31 (L) Ground Washer level switch signal Input Ignition switch ON Washer level switch ON 0 V
Washer level switch OFF 5 V
33 (B) Ground Illumination control signal Output Ignition switch ON Lighting switch ON, then operate the illumination control switch.
NOTE: When brightness level is midway
G04888300Courtesy of NISSAN MOTOR CO., U.S.A.
36 (LG) 16 (B) Select switch signal Input Ignition switch ON When (+) is pressed 0 V
Other than the above 5 V
37 (SB) 16 (B) Enter switch signal Input Ignition switch ON When (-) is pressed 0 V
Other than the above 5 V
38 (L) 16 (B) Trip A/B reset switch signal Input Ignition switch ON When trip A/B reset switch is pressed 0 V
Other than the above 5 V
39 (P) 16 (B) Illumination control switch signal (-) Input Ignition switch ON When switch is pressed 0 V
Other than the above 5 V
40 (O) 16 (B) Illumination control switch signal (+) Input Ignition switch ON When (+) switch is pressed 0 V
Other than the above 5 V
scientia non olet · About LEMON Manuals