LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> EX35 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> Component Diagnosis >> Washer Level Switch Signal Circuit >> Component Inspection

Component Inspection

  1. CHECK WASHER LEVEL SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect washer level switch connector.
    3. Check washer level switch.
      CONTINUITY REFERENCE CHART

      Terminal Condition Continuity
      1 2 Washer fluid level is low (washer level switch ON) Existed
      Washer fluid level is normal (washer level switch OFF) Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace washer level switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals