LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M35 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Glove Box >> GLOVE BOX : Removal and Installation >> Removal

GLOVE BOX : Removal and Installation: Removal

  1. Remove glove box.
    • Remove damper pin to left side.
    • Pull up glove box.
      • Fig 1: Removing Glove Box
      G05212843Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove instrument passenger lower cover.
    • Pull downward, disengaged pawls.
    • Pull back instrument passenger lower cover.
    • Disconnect harness connector.
  3. Remove instrument side finisher.
    • Insert a remover into lower space.
    • Pull the instrument side finisher RH crosswise.
  4. Remove glove box cover with power tool.
scientia non olet · About LEMON Manuals