LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M35 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Cluster Lid A >> CLUSTER LID A : Removal and Installation >> Removal

CLUSTER LID A : Removal and Installation: Removal

  1. Remove instrument side finisher.
    • Insert a remover into lower space.
    • Pull the instrument side finisher LH crosswise.
      • Fig 1: Locating Instrument Side Finisher
      G05212845Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove instrument driver lower panel.
  3. Remove instrument finisher A.
    • Insert a remover into upper space.
    • Pull back instrument finisher A.
      • Fig 3: Locating Instrument Finisher A
      G05212847Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove instrument finisher C.
    • Insert a remover into upper space.
    • Pull back instrument finisher C.
      • Fig 4: Removing Instrument Finisher C
      G05212848Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove cluster lid A.
    • Pull back.
      Fig 5: Identifying Cluster Lid A
      G05212849Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals