4WAS FRONT ACTUATOR NEUTRAL POSITION ADJUSTMENT : Special Repair Requirement (Pattern 1)

4WAS FRONT ACTUATOR ADJUSTMENT
With CONSULT-III
1. Start the engine.
  CAUTION: Stop the vehicle.
2. Turn the steering wheel to adjust "ACTR ROTA ANG" of the 4WAS front control unit "DATA MONITOR" so that it falls within the range shown below:
  ACTR ROTA ANG : -3.5 - 3.5 deg
3. Turn the ignition switch OFF.
CAUTION: Never touch the steering wheel after turning ignition switch OFF.

END