LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - G37 Coupe - DTC U0113, U1000, U1001, U1003, U1010, U1011 & U1024; DTC P0011 Through P0223 >> P010A Manifold Absolute Pressure Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

      GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Start engine and let it idle for 10 seconds.
    2. Check DTC.

    Is DTC detected? 

    YES: Go to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

scientia non olet · About LEMON Manuals