DTC Index
DTC INDEX
| Display contents of CONSULT-III | Time | Diagnostic item is detected when... | |
|---|---|---|---|
| U1000: CAN COMM CIRCUIT | CRNT | PAST | When unified meter and A/C amp. is not transmitting or receiving CAN communication signal for 2 seconds or more. |
| U1010: CONTROL UNIT (CAN) | CRNT | PAST | When detecting error during the initial diagnosis of CAN controller of unified meter and A/C amp. |
| B2201: COMM ERROR 1 | CRNT | PAST | If a communication error is present in the communication line between unified meter and A/C amp. and combination meter for 2 seconds or more. |
| B2202: COMM ERROR 2 | CRNT | PAST | If a communication error is present in the communication line between unified meter and A/C amp. and combination meter for 2 seconds or more. |
| B2205: VEHICLE SPEED | CRNT | PAST | The abnormal vehicle speed signal is input from ABS actuator and electric unit (control unit) for 2 seconds or more. |
| B2267: ENGINE SPEED | CRNT | PAST | If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. |
| B2268: WATER TEMP | CRNT | PAST | If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. |
|
NOTE:
The details of TIME display are as follows.
|
|||