LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> Component Diagnosis >> Washer Level Switch Signal Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK WASHER LEVEL SWITCH SIGNAL CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect combination meter connector and washer level switch connector.
    3. Check continuity between combination meter harness connector terminal and washer level switch harness connector terminal.
      CONNECTOR TERMINAL CONTINUITY CHART

      Combination meter Washer level switch Continuity
      Connector Terminal Connector Terminal
      M53 31 E32 1 Existed
    4. Check continuity between combination meter harness connector terminal and ground.
    CONNECTOR TERMINAL CONTINUITY CHART

    Combination meter Ground Continuity
    Connector Terminal
    M53 31 Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Repair harness or connector.

scientia non olet · About LEMON Manuals