Component Function Check

CHECK UNIFIED METER AND A/C AMP. OUTPUT SIGNAL

Select the "Data Monitor" for the "METER/M&A" and compare the "FUEL METER" monitor value with the fuel gauge reading on the combination meter.

FUEL METER MONITOR VALUE REFERENCE

Fuel gauge pointer	Reference value of data monitor [lit.]
Full	Approx. 68.8
Three quarters	Approx. 60
Half	Approx. 39.2
A quarter	Approx. 20.8
Empty	Approx. 5.6

Does monitor value match fuel gauge reading?

YES: INSPECTION END

NO: Replace combination meter.