LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> FX45 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiper, Washer & Horn >> Front Wiper And Washer System >> Removal and Installation of Front Wiper Drive Assembly >> Removal

Removal and Installation of Front Wiper Drive Assembly: Removal

  1. Remove front wiper arms. Refer to "REMOVAL ".
  2. Remove cowl top cover. Refer to "COWL TOP ".
  3. Remove washer tube.
  4. Disconnect wiper motor connector.
  5. Remove front wiper drive assembly mounting bolts, and remove front wiper drive assembly from the vehicle.
    6. Fig 1: Locating Wiper Motor Connector
    G05222545Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals