LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> FX45 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiper, Washer & Horn >> Front Wiper And Washer System >> Disassembly and Assembly of Front Wiper Drive Assembly >> Assembly

Disassembly and Assembly of Front Wiper Drive Assembly: Assembly

  1. Connect wiper motor connector. Turn front wiper switch ON to operate wiper motor, and then turn front wiper switch OFF (auto stop).
  2. Disconnect wiper motor connector.
  3. Install wiper motor to wiper motor mounting frame.

    Wiper motor mounting bolts :4.5 N.m (0.46 kg-m, 40 in-lb) 

  4. Install wiper linkages to wiper frame and wiper motor.
CAUTION:
  • Never drop the wiper motor or cause it to interfere with other parts.
  • Check joint of motor arm and wiper linkages (at retainer) for grease conditions. Apply grease if necessary.
scientia non olet · About LEMON Manuals