Component Inspection

1. Turn ignition switch OFF.
2. Disconnect door switch connector.
3. Check door switch terminals.
   TERMINALS CONTINUITY REFERENCE
   
   

   Terminal			Door switch condition	Continuity
   Door switch
   Each door	2	Ground part of door switch	Pressed	Not existed
   			Released	Existed
   Back door	3	4	Pressed	Not existed
   			Released	Existed

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace malfunction door switch.

• Door switch: Refer to REMOVAL AND INSTALLATION  .
• Back door lock assembly (back door switch): Refer to REMOVAL AND INSTALLATION  .