Component Description

INFORMATION DISPLAY - COMPONENT DESCRIPTION

Unit	Description
Combination meter	Controls the information display with the signals received from the unified meter and A/C amp. by means of communication and the signals from various switches and sensors.
Unified meter and A/C amp.	Transmits signals received from various units to the combination meter by means of communication.
Fuel level sensor unit	Refer to DESCRIPTION .
ECM	Transmits the following signals to the unified meter and A/C amp. via CAN communication. Engine speed signal Fuel consumption monitor signal
ABS actuator and electric unit (control unit)	Transmits the vehicle speed signal to the unified meter and A/C amp. via CAN communication.
BCM	Transmits signals provided by various units to the unified meter and A/C amp. via CAN communication.
Meter control switch	Transmits the following signals to the combination meter. Enter switch signal Select switch signal
Washer level switch	Transmits the washer level signal to the combination meter.
Parking brake switch	Refer to DESCRIPTION .
Door switch	Transmits the door switch signals to BCM.
Ambient sensor	Detects the ambient air temperature and transmits the ambient sensor signal to the unified meter and A/C amp.