Diagnosis Procedure
- CHECK PARKING BRAKE WARNING LAMP
- Start the engine.
- Check the operation of the brake warning lamp by operating the parking brake.
Parking brake ON : ON
Parking brake OFF : OFF
Is the inspection result normal?
YES: Replace the combination meter.
NO: GO TO 2.
- CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT
Perform a inspection for the parking brake switch signal circuit. Refer to "DIAGNOSIS PROCEDURE (A/T MODEL) " or "DIAGNOSIS PROCEDURE (M/T MODEL) ".
Is the inspection result normal?
YES: GO TO 3.
NO: Repair harness or connector.
- CHECK PARKING BRAKE SWITCH UNIT
Perform a unit inspection for the parking brake switch. Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: Replace the combination meter.
NO: Replace the parking brake switch. Refer to "PEDAL TYPE : REMOVAL AND INSTALLATION " (pedal type) or "LEVER TYPE : REMOVAL AND INSTALLATION " (lever type).