SEAT BELT WARNING CHIME : System Description: Description

With ignition switch turned ON and driver seat belt unfastened, seat belt warning chime will sound for approximately 6 seconds.

• BCM receives seat belt buckle switch signal from unified meter and A/C amp. with CAN communication line.
• BCM detects ignition switch turned ON and seat belt buckle switch (driver side) ON. And then transmits buzzer output signal (seat belt warning chime) to unified meter and A/C amp. with CAN communication line.
• Unified meter and A/C amp. transmits buzzer output signal (seat belt warning chime) to combination meter with communication line.
• When combination meter receives buzzer output signal (seat belt warning chime), it sounds the buzzer.