Data Monitor
Display Item List
DISPLAY ITEM LIST - DATA MONITOR
| X: Applicable | ||
|---|---|---|
| Display item [Unit] | MAIN SIGNALS | Description |
| SPEED METER [km/h] | X | Value of vehicle speed signal received from ABS actuator and electric unit (control unit) with CAN communication line.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
| SPEED OUTPUT [km/h] | X | Vehicle speed signal value transmitted to other units with CAN communication line.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
| ODO OUTPUT [km/h or mph] | - | Odometer signal value transmitted to other units with CAN communication line. |
| TACHO METER [rpm] | X | Value of the engine speed signal received from ECM with CAN communication line.
NOTE:
8191.875 is displayed when the malfunction signal is received.
|
| FUEL METER [lit.] | X | Fuel level indicated on combination meter. |
| W TEMP METER [°C] | X | Value of engine coolant temperature signal received from ECM with CAN communication line.
NOTE:
215 is displayed when the malfunction signal is input.
|
| ABS W/L [On/Off] | - | Status of ABS warning lamp judged from ABS warning lamp signal received from ABS actuator and electric unit (control unit) with CAN communication line. |
| VDC/TCS IND [On/Off] | - | Status of VDC indicator lamp judged from VDC OFF indicator lamp signal received from ABS actuator and electric unit (control unit) with CAN communication line. |
| SLIP IND [On/Off] | - | Status of slip indicator lamp judged from slip indicator lamp signal received from ABS actuator and electric unit (control unit) with CAN communication line. |
| BRAKE W/L [On/Off] | - | Status of brake warning lamp judged from brake warning lamp signal received from ABS actuator and electric unit (control unit) with CAN communication line.
NOTE:
Displays "Off" if the brake warning lamp is illuminated when the valve check starts, the parking brake switch is turned ON or the brake fluid level switch is turned ON.
|
| DOOR W/L [On/Off] | - | Status of door warning judged from door switch signal received from BCM with CAN communication line. |
| TRUNK/GLAS-H [On/Off] | - | Status of trunk warning judged from trunk switch signal received from BCM with CAN communication line. |
| HI-BEAM IND [On/Off] | - | Status of high beam indicator lamp judged from high beam request signal received from BCM with CAN communication line. |
| TURN IND [On/Off] | - | Status of turn indicator lamp judged from turn indicator signal received from BCM with CAN communication line. |
| FR FOG IND [On/Off] | - | Status of front fog light indicator lamp judged from front fog light request signal received from BCM with CAN communication line. |
| RR FOG IND [Off] | - | This item is displayed, but cannot be monitored. |
| LIGHT IND [On/Off] | - | Status of light indicator lamp judged from position light request signal received from BCM with CAN communication line. |
| OIL W/L [On/Off] | - | Status of oil pressure warning lamp judged from oil pressure switch signal received from IPDM E/R with CAN communication line. |
| MIL [On/Off] | - | Status of malfunction indicator lamp judged from malfunctioning indicator lamp signal received from ECM with CAN communication line. |
| CRUISE IND [On/Off] | - | Status of CRUISE indicator judged from ASCD status signal received from ECM with CAN communication line. |
| SET IND [On/Off] | - | Status of set indicator judged from ASCD SET indicator signal received from ECM with CAN communication line. |
| CRUISE W/L [On/Off] | - | Status of CRUISE warning lamp judged from ASCD status signal received from ECM with CAN communication line. |
| BA W/L [Off] | - | This item is displayed, but cannot be monitored. |
| ATC/T-AMT W/L [On/Off] | - | Status of A/T check warning lamp judged from A/T check indicator signal received from TCM with CAN communication line. |
| 4WD W/L [On/Off] | - | Status of AWD warning lamp judged from AWD warning lamp signal received from AWD control unit with CAN communication line. |
| 4WD LOCK IND [Off] | - | This item is displayed, but cannot be monitored. |
| FUEL W/L [On/Off] | - | Low-fuel warning status judged by the identified fuel level. |
| WASHER W/L [On/Off] | - | Status of washer warning lamp judged from washer level switch input to combination meter. |
| AIR PRES W/L [On/Off] | - | Status of tire pressure warning lamp judged from tire pressure signal received from BCM with CAN communication line. |
| KEY G/Y W/L [On/Off] | - | Status of key warning lamp (G/Y) judged from key warning signal received from BCM with CAN communication line. |
| AFS OFF IND [On/Off] | - | Status of AFS OFF indicator lamp judged from AFS OFF indicator lamp signal received from AFS control unit with CAN communication line. |
| 4WAS/RAS W/L [On/Off] | - | Status of 4WAS warning lamp judged from 4WAS warning lamp signal received from 4WAS main control unit with CAN communication line. |
| LCD [B&P N, B&P I, ID NG, ROTAT, SFT P, INSRT, BATT, NO KY,OUTKY, LK WN, C&P N,C&P I] | - | Displays status of Intelligent Key system warning judged from meter display signal received from BCM with CAN communication line. |
| ACC TARGET [On/Off] | - | Status of vehicle ahead detection indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. |
| ACC DISTANCE [Off, SHOR, MID, LONG] | - | Status of set distance indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. |
| ACC OWN VHL [On/Off] | - | Status of own vehicle indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. |
| ACC SET SPEED [On/Off] | - | Status of set vehicle speed indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. |
| ACC UNIT [On/Off] | - | Status of display unit judged from meter display signal received from ICC sensor integrated unit with CAN communication line. |
| SHIFT IND [P, R, N, D, M1, M2, M3, M4, M5] | - | Status of A/T position indicator judged from shift position signal and manual mode indicator signal received from TCM with CAN communication line. |
| AT S MODE SW [On/Off] | - | Status of snow mode switch. |
| AT P MODE SW [On/Off] | - | This item is displayed, but cannot be monitored. |
| M RANGE SW [On/Off] | - | Status of manual mode switch. |
| NM RANGE SW [On/Off] | - | Status of not manual mode switch. |
| AT SFT UP SW [On/Off] | - | Status of A/T shift up switch. |
| AT SFT DWN SW [On/Off] | - | Status of A/T shift down switch. |
| ST SFT UP SW [On/Off] | - | Status of paddle shifter up switch. |
| ST SFT DWN SW [On/Off] | - | Status of paddle shifter down switch. |
| COMP FB SIG [On/Off] | - | A/C compressor activation condition that ECM judges according to the water temperature and the acceleration degree. |
| 4WD LOCK SW [Off] | - | This item is displayed, but cannot be monitored. |
| PKB SW [On/Off] | - | Status of parking brake switch. |
| BUCKLE SW [On/Off] | - | Status of seat belt buckle switch. |
| BRAKE OIL SW [On/Off] | - | Status of brake fluid level switch. |
| DISTANCE [km] | - | Value of possible driving distance calculated by unified meter and A/C amp. |
| OUTSIDE TEMP [°C or °F] | - | Ambient temperature value converted from ambient sensor signal received from ambient sensor.
NOTE:
This may not match with the temperature value indicated on the information display. (Because the information display value is a corrected value from the ambient sensor input value.)
|
| FUEL LOW SIG [On/Off] | - | Status of fuel level low warning signal to output to AV control unit with CAN communication line. |
| BUZZER [On/Off] | - | Buzzer status (in the combination meter) is judged with the buzzer output signal received from each unit with CAN communication line and the warning output condition of the combination meter. |
NOTE:
Some items are not available according to vehicle specification.