Diagnosis Procedure
- CHECK POWER SUPPLY OF COMBINATION METER
Check power supply of combination meter. Refer to , "COMBINATION METER : DIAGNOSIS PROCEDURE ".
Is the inspection result normal?
YES: GO TO 2.
NO: Repair power supply circuit of combination meter.
- CHECK BATTERY POWER SUPPLY OF UNIFIED METER AND A/C AMP.
Check battery power supply of unified meter and A/C amp. Refer to , "UNIFIED METER AND A/C AMP. : DIAGNOSIS PROCEDURE ".
Is the inspection result normal?
YES: INSPECTION END
NO: Repair power supply circuit of unified meter and A/C amp.