LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> FX35 RWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiper, Washer & Horn >> Front Wiper And Washer System >> Removal and Installation of Front Wiper Drive Assembly >> Installation

Removal and Installation of Front Wiper Drive Assembly: Installation

  1. Install front wiper drive assembly to the vehicle.

    Front wiper drive assembly mounting bolt : 4.5 N.m (0.46 kg-m, 40 in-lb) 

  2. Connect wiper motor connector. Turn front wiper switch ON to operate wiper motor, and then turn front wiper switch OFF (auto stop).
  3. Install washer tube to washer tube joint.
  4. Install cowl top cover. Refer to "COWL TOP ".
  5. Install front wiper arms and arm caps. Refer to "INSTALLATION ".
  6. Install front wiper arm washer tube.
scientia non olet · About LEMON Manuals