CONSULT-II Functions (BCM): Notes
CONSULT-II can display each diagnostic item using the diagnostic test mode shown following.
BCM DESCRIPTION
| BCM diagnosis position | Diagnosis mode | Description |
|---|---|---|
| WIPER | WORK SUPPORT | Changes the setting for each function. |
| DATA MONITOR | Displays BCM input data in real time. | |
| ACTIVE TEST | Device operation can be checked by applying a drive signal to device. | |
| BCM | SELF-DIAG RESULTS | BCM performs self-diagnosis of CAN communication. |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. |