LOW SPEED OPERATION (Rain sensing)

When the front wiper switch is turned to INT position, power is supplied

through 20A fuse [No.34, located in fuse block (J/B) No. 2]
to front wiper relay terminal 1
through front wiper relay terminal 2
to BCM terminal 128 and
to front wiper motor terminal 4.

Ground is supplied

through front wiper motor terminal 6
to front wiper rain relay terminal 4
through front wiper rain relay terminal 3
to front wiper switch terminal 14
through front wiper switch terminal 13
to front wiper relay terminal 3
through front wiper relay terminal 5
to grounds E24, E42 and E62.