Preliminary Inspection
- CHECK BCM (CONSULT-II)
Perform self-diagnosis of BCM. Refer to "CONSULT-II Function (BCM) ".
Self-diagnosis results
- No malfunction detected : GO TO 2.
- Malfunction detected : Check applicable parts, and repair or replace corresponding parts.
- CHECK UNIFIED METER AND A/C AMP. (CONSULT-II)
Perform self-diagnosis of unified meter and A/C amp. Refer to "CONSULT-II Function (METER A/C AMP) ".
Self-diagnosis results
- No malfunction detected : INSPECTION END
- Malfunction detected : Check applicable parts, and repair or replace corresponding parts.