Turn Signal Input Inspection

Check turn signal input "TURN SIGNAL" in "DATA MONITOR" mode with CONSULT-II.

"TURN SIGNAL" 

When lighting switch is in TURN RH position : RH 

When lighting switch is in TURN LH position : LH 

When hazard switch is turned ON : RH/LH 

OK or NG 

OK : INSPECTION END

NG : Check turn signal and hazard warning lamps system, and repair or replace corresponding parts. Refer to "HOW TO PROCEED WITH TROUBLE DIAGNOSIS ".

Fig 1: Displaying Data Monitor

Courtesy of NISSAN MOTOR CO., U.S.A.