Terminals and Reference Values for IPDM E/R

TERMINALS AND REFERENCE VALUES FOR IPDM E/R

Terminal No.	Wire color	Signal name	Measuring condition			Reference value
Terminal No.	Wire color	Signal name	Ignition switch	Operation or condition		Reference value
21	P	Low speed signal	ON	Wiper switch	OFF	Approx. 0 V
21	P	Low speed signal	ON	Wiper switch	LOW	Battery voltage
31	PU	High speed signal	ON	Wiper switch	OFF	Approx. 0 V
31	PU	High speed signal	ON	Wiper switch	HI	Battery voltage
32	L	Wiper auto - stop signal	ON	Wiper operating		Battery voltage
32	L	Wiper auto - stop signal	ON	Wiper stopped		Approx. 0 V
38	B	Ground	ON	-		Approx. 0 V
44	OR	Washer motor power supply	ON	-		Battery voltage
48	L	CAN - H -	-	-		-
49	R	CAN - L -	-	-		-
60	B	Ground	ON	-		Approx. 0 V