LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Electrical >> Horns >> Wiper, Washer & Horn >> Front Wiper And Washer System >> Removal and Installation of Front Wiper Drive Assembly >> Removal

Removal and Installation of Front Wiper Drive Assembly: Removal

  1. Prior to front wiper drive assembly removal, turn ON wiper switch to operate wiper motor and then turn it "OFF" (auto stop).
  2. Remove wiper arm. Refer to "REMOVAL ".
  3. Remove cowl top cover. Refer to "COWL TOP ".
  4. Remove washer tube.
  5. Disconnect wiper motor connector.
  6. Remove front wiper drive assembly mounting bolts, and remove front wiper drive assembly.
    Fig 1: Identifying Front Wiper Drive Assembly Mounting Bolts
    G04078710Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals