Display Item List
DISPLAY ITEM LIST
| Display item [Code] | Malfunction is detected when... |
|---|---|
| CAN COMM CIRC [U1000] | Malfunction is detected in CAN communication.
CAUTION:
Even when there is no malfunction on CAN communication system, malfunction may be misinterpreted when battery has low voltage (when maintaining 7 - 8 V for about 2 seconds) or 10A fuse [No. 19, located in the fuse block (J/B)] is disconnected.
|
| METER COMM CIRC [B2202] | Malfunction is detected in communication of between combination meter and unified meter and A/C amp. |
| VEHICLE SPEED CIRC [B2205] | When an erroneous speed signal is input for 1 second.
CAUTION:
Even when there is no malfunction on speed signal system, malfunction may be misinterpreted when battery has low voltage (when maintaining 7 - 8 V for about 2 seconds).
|
NOTE:
"TIME" means the following.
- 0: Means detected malfunction at present. (From malfunction detection to turning ignition switch OFF)
- 1 - 63: Means detected malfunction in the past. (Displays the number of ignition switch OFF --> ON after detecting malfunction. "SELF-DIAG RESULTS" is erased when exceeding "63".)