LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Rear Disc Brake >> Removal and Installation of Brake Pad >> Removal

Removal and Installation of Brake Pad: Removal

  1. Remove tires from vehicle with power tool.
  2. Remove sliding pin bolt (one on top).
  3. Suspend cylinder body with a wire, and remove pads, pad retainers, shim from torque member.
scientia non olet · About LEMON Manuals