LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Brake Tube And Hose >> Removal and Installation of Rear Brake Piping and Brake Hose >> Removal

Removal and Installation of Rear Brake Piping and Brake Hose: Removal

  1. Drain brake fluid. Refer to "DRAIN AND REFILL ".
  2. Using a flare nut wrench, remove brake tube from brake hose.
  3. Remove union bolt, and then remove brake hose from caliper assembly.
  4. Remove lock nut plate and remove brake hose from vehicle.
scientia non olet · About LEMON Manuals