LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Brake Pedal >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove front kicking plate (driver side). Refer to "KICKING PLATE ".
  2. Remove dash side finisher (driver side). Refer to "DASH SIDE FINISHER ".
  3. Remove instrument lower panel (driver side). Refer to "INSTRUMENT PASSENGER LOWER PANEL ".
  4. Remove steering column assembly. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove stop lamp switch and ASCD cancel switch (or brake switch) from pedal assembly.
  6. Remove snap pin and clevis pin from brake booster clevis.
  7. Remove mounting nuts and bolt from bracket, and remove brake pedal assembly from vehicle.
    Fig 1: Identifying Snap Pin And Clevis Pin
    G04076618Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals