LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Brake Master Cylinder >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove cowl top cover. Refer to "COWL TOP ".
  2. Drain brake fluid. Refer to "DRAIN AND REFILL ".
  3. Remove harness connectors for fluid level sensor and pressure sensor.
  4. Using a flare nut wrench, remove brake tube from master cylinder assembly.
  5. Remove master cylinder assembly mounting nut, remove master cylinder assembly from the vehicle. Refer to "REMOVAL AND INSTALLATION ".
scientia non olet · About LEMON Manuals