LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Brake Master Cylinder >> Disassembly and Assembly >> Assembly

Disassembly and Assembly: Assembly

CAUTION:
  • Do not use mineral oil such as kerosene, gasoline during the cleaning and assembly process.
  • Do not drop parts. If a part is dropped, do not use it.
  1. Apply brake fluid grommet and attach to master cylinder assembly.
    CAUTION: Do not reuse grommet.
    Do not reuse pin.
  2. Install reservoir tank onto master cylinder assembly.
  3. Install pin (1).
    Fig 1: Identifying Reservoir Tank Onto Master Cylinder Assembly
    G04076631Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals