DTC C1144

INSPECTION PROCEDURE

1. CHECK SELF-DIAGNOSTIC RESULTS (1) 

   Check self-diagnostic results.

   SELF-DIAGNOSTIC RESULTS CHART
   
   

   Self-diagnostic results
   ST ANG SEN SIGNAL

   Does anything besides "ST ANG SEN SIGNAL" appear on self-diagnostic results display?

   YES : Inspect and repair the indicated items. Then perform self-diagnosis again.

   NO : Perform adjustment of steering angle sensor neutral position. Then GO TO 2.

2. CHECK SELF DIAGNOSIS RESULTS (2) 

   Turn ignition switch OFF and ON to erase self-diagnostic results, and perform ABS actuator and electric unit (control unit) self-diagnosis again.

   Does anything appear on self-diagnostic results display?

   YES : Replace steering angle sensor. Then perform adjustment of neutral position and perform self-diagnosis again.

   NO : INSPECTION END