Removal Of Seatback Trim And Pad

Remove the trunk net hook in the back of the seatback.

Fig 1: Trunk Net Hook In Back Of Seatback With Torque Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.
After removing the seatback garnish, remove the hog rings.
Remove the headrest.
Remove the headrest holder.
Squeeze and pull up headrest holder tabs to remove from seatback frame.

NOTE: Before installing the headrest holder, check its orientation (front, rear, left and right).

Fig 2: Identifying Headrest Holder
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove the armrest (LH only).

Fig 3: Armrest With Torque Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.
After removing the seatback trim and pad, separate the trim and pad.