Terminals and Reference Values for BCM

TERMINALS AND REFERENCE VALUES CHART

Terminal No.	Wire color	Signal name	Measuring condition			Reference value
			Ignition switch	Operation or condition
2	R	Combination switch input 5	ON	Lighting, turn, wiper switch (Wiper intermittent dial position 4)	OFF	Approx. 0 V
					Turn signal switch to right	Approx. 1.0 V
3	P/L	Combination switch input 4	ON	Lighting, turn, wiper switch (Wiper intermittent dial position 4)	OFF	Approx. 0 V
					Turn signal switch to left	Approx. 1.0 V
11	LG	Ignition switch (ACC)	ACC	-		Battery voltage
29	G/Y	Hazard switch signal	OFF	Hazard switch	ON	Approx. 0 V
					OFF	Battery voltage
36	L/W	Combination switch output 1	ON	Lighting, turn, wiper switch (Wiper intermittent dial position 4)	OFF	Approx. 7.2 V
					Any of the conditions below Turn signal switch to right Turn signal switch to left	Approx. 1.2 V
38	W/L	Ignition switch (ON)	ON	-		Battery voltage
39	L	CAN - H	-	-		-
40	P	CAN - L	-	-		-
42	L/R	Battery power supply	OFF	-		Battery voltage
45	G/W	Flasher output (left)	ON	Combination switch	Turn left ON
46	BR/W	Flasher output (right)	ON	Combination switch	Turn right ON
49	B	Ground	ON	-		Approx. 0 V
52	B	Ground	ON	-		Approx. 0 V
55	G	Battery power supply	OFF	-		Battery voltage