LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Parking, License Plate And Tail Lamps >> License Plate Lamp >> Bulb Replacement, Removal And Installation

Bulb Replacement, Removal And Installation

  1. Remove screws and remove license plate lamp from back door.
  2. Disconnect license plate lamp connector.
    Fig 1: Identifying License Plate Lamp Connector
    G04078351Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Insert a flat head or suitable tool and remove housing.
  4. Remove bulb from it's socket.

    License plate lamp : 12 V - 5 W 

  5. Installation is the reverse order of removal.
    Fig 2: Identifying Bulb From Socket
    G04078352Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals