Front Fog Lamp Does Not Illuminate (One Side)

Check bulb of lamp which does not illuminate.

OK or NG 

OK : GO TO 2.

NG : Replace front fog lamp bulb.

1. Turn ignition switch OFF.
2. Disconnect IPDM E/R connector.
3. Check continuity between IPDM E/R harness connector (A) and front fog lamp (RH and LH) harness connector (B).
   COMPONENT FUNCTION CHART
   
   

   Circuit	A		B		Continuity
   	Connector	Terminal	Connector	Terminal
   RH	E8	36	E102	1	Yes
   LH		37	E45	1

   Fig 1: Identifying Continuity Between IPDM E/R Harness Connector (A) And Front Fog Lamp (RH And LH) Harness Connector

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK : GO TO 3.

NG : Repair harness or connector.

1. Check continuity between front fog lamp RH harness connector E102 terminal 2 and ground.

   2 - Ground : Continuity should exist. 

2. Check continuity between front fog lamp LH harness connector E45 terminal 2 and ground.

   2 - Ground : Continuity should exist. 

OK or NG 

OK : Replace IPDM E/R.

NG : Repair harness or connector.

Fig 2: Identifying Continuity Between Front Fog Lamp LH Harness Connector E45 Terminal 2 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.