LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Driver Information System >> Combination Meters >> Removal and Installation of ODO/Trip Meter and Illumination Control Switch >> Removal

Removal and Installation of ODO/Trip Meter and Illumination Control Switch: Removal

  1. Remove combination meter. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  2. Remove switch and meter housing. Refer to "DISASSEMBLY AND ASSEMBLY OF COMBINATION METER ".
  3. Remove screws (2), and remove switch assembly.
    Fig 1: Identifying Switch And Meter Housing
    G04078470Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove screws (5), and remove ODO/trip meter and illumination control switch.
    Fig 2: Identifying ODO/Trip Meter And Illumination Control Switch
    G04078471Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals