ODO/Trip Meter and Illumination Control Switch Inspection

Symptom: Illumination control does not operate.

1. CHECK ODO/TRIP METER AND ILLUMINATION CONTROL SWITCH 
   1. Remove ODO/trip meter and illumination control switch. Refer to "REMOVAL AND INSTALLATION OF ODO/TRIP METER AND ILLUMINATION CONTROL SWITCH ".
   2. Check continuity ODO/trip meter and illumination control switch. Refer to "ODO/TRIP METER AND ILLUMINATION CONTROL SWITCH ".

   OK or NG 

   OK : Replace combination meter.

   NG : Replace ODO/trip meter and illumination control switch.