NATS Self-Diagnostic Result Item Chart
NATS SELF-DIAGNOSTIC RESULT ITEM CHART
| Detected items (Screen terms) | P No.Code (Self-diagnostic result of "ENGINE") | Description | Diagnostic procedure |
|---|---|---|---|
| ECM INT CIRC-IMMU | P1613 | The malfunction of ECM internal circuit to BCM communication line is detected. | Refer to "DIAGNOSTIC PROCEDURE 1 ". |
| CHAIN OF ECM-IMMU | P1612 | Communication impossible between ECM and BCM. | Refer to "DIAGNOSTIC PROCEDURE 2 ". |
| DIFFERENCE OF KEY | P1615 | BCM can receive the key ID signal but the result of ID verification between key ID and BCM is NG. | Refer to "DIAGNOSTIC PROCEDURE 3 ". |
| CHAIN OF IMMU-KEY | P1614 | BCM cannot receive the key ID signal. | Refer to "DIAGNOSTIC PROCEDURE 6 ". |
| ID DISCORD, IMM-ECM | P1611 | The result of ID verification between BCM and ECM is NG. System initialization is required. | Refer to "DIAGNOSTIC PROCEDURE 4 ". |
| LOCK MODE | P1610 | When the starting operation is carried out 5 or more times consecutively under the following conditions, IVIS(NATS) will shift the mode to prevent the engine start.
|
Refer to "DIAGNOSTIC PROCEDURE 5 ". |
| DON'T ERASE BEFORE CHECKING ENG DIAG | - | Engine trouble data and IVIS (NATS) trouble data have been detected in ECM. | Refer to "WORK FLOW ". |