LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body, Lock & Security System >> Hood >> Fitting Adjustment >> Longitudinal And Lateral Clearance Adjustment

Longitudinal And Lateral Clearance Adjustment

  1. Remove hood lock assembly, loosen the hood hinge nuts and close the hood.
  2. Adjust the lateral and longitudinal clearance, and open the hood to tighten the hood hinge mounting bolts to the specified torque.
  3. Install the hood lock temporarily, and align the hood striker and lock so that the centers of striker and lock become vertical viewed from the front, by moving the hood lock laterally.
  4. Tighten hood lock mounting bolts to the specified torque.
    CAUTION: Adjust right/left clearance between hood and headlamp to the following specification.

    Hood and headlamp (C-C) : Less than 2.0 mm (0.08 in) 

scientia non olet · About LEMON Manuals