Power Supply And Ground Circuit

Power is supplied at all times

through 10A fuse [No. 19, located in the fuse block (J/B)]
to combination meter terminal 21.

With the ignition switch in the ON or START position, power is supplied

through 10A fuse [No. 14, located in the fuse block (J/B)]
to combination meter terminals 22 and 23.

With the ignition switch in the ACC or ON position, power is supplied

through 10A fuse [No. 6, located in the fuse block (J/B)]
to combination meter terminal 18.

Ground is supplied

to combination meter terminals 1, 24 and 25
through grounds M30 and M66.