Turn Signal Operation: Notes

When ignition switch is in the ON or START position, power is supplied

• through 10A fuse [No. 1, located in fuse block (J/B)]
• to BCM (body control module) terminal 38,
• through 10A fuse [No. 14, located in fuse block (J/B)]
• to combination meter terminals 22 and 23.

Ground is supplied

• to BCM (body control module) terminal 52
• through grounds M30 and M66,
• to combination meter terminals 1, 24 and 25
• through grounds M30 and M66.