CONSULT-II Functions (IPDM E/R): Notes
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-II Functions (IPDM E/R) Table
| Diagnosis Mode | Description |
|---|---|
| SELF-DIAGNOSTIC RESULTS | Refer to "SELF-DIAG RESULTS ". |
| DATA MONITOR | The input/output data of IPDM E/R is displayed in real time. |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. |
| ACTIVE TEST | IPDM E/R sends a drive signal to electronic components to check their operation. |