Out Line
Power is supplied at all times
- Through 50 A fusible link (letter M, located in fuse, fusible link and relay box.)
- to BCM terminal 55,
- Through 15 A fuse [No, 22, located in fuse block (J/B)]
- to BCM terminal 42,
- Through 30 A fuse (No. 73, located in IPDM E/R)
- to front wiper relay, located in IPDM E/R,)
- Through 15 A fuse (No. 78, located in IPDM E/R), and
- Through 10 A fuse (No. 71, located in IPDM E/R)
- to CPU located in IPDM E/R.
When the ignition switch is ON or START position, power is supplied
- to ignition relay located in IPDM E/R, from battery direct,
- Through 15 A fuse [No. 1, located in fuse block (J/B)]
- to BCM terminal 38,
- Through ignition relay, located in IPDM E/R
- to front wiper relay, located in IPDM E/R
- to front wiper high relay, located in IPDM E/R, and
- to CPU located in IPDM E/R,
- Through 10 A fuse (No. 84, located in IPDM E/R)
- Through IPDM E/R terminal 44
- to front washer motor terminal 1.
Ground is supplied
- to BCM terminals 49 and 52
- Through grounds M35, M45 and M85,
- to IPDM E/R terminals 38 and 60
- Through grounds E21, E50 and E51,
- to combination switch terminal 12
- Through grounds M35, M45 and M85