Operation Procedure
WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- Touch "ACTIVE TEST" on "SELECT DIAG-MODE" screen.
- Touch item to be tested, and check operation.
- Touch "START".
- Touch "STOP" while testing to stop the operation.ACTIVE TEST DESCRIPTION
Test name CONSULT-II screen display Description Rear defogger output REAR DEFOGGER With a certain ON-OFF operation, the rear defogger relay can be operated. Front wiper (HI, LO) output FRONT WIPER With a certain operation (OFF, HI ON, LO ON), the front wiper relay (Lo, Hi) can be operated. Cooling fan output MOTOR FAN With a certain operation (1, 2, 3, 4), the cooling fan can be operated. Lamp (HI, LO, TAIL, FOG) output EXTERNAL LAMPS With a certain operation (OFF, HI ON, LO ON, TAIL ON, FOG ON), the lamp relay (Low, High, Tail, Fog) can be operated. Cornering lamp output CORNERING LAMP - Horn output HORN With a certain ON-OFF operation, the horn relay can be operated.