DTC 107: Laser Comm Fail
WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- DIAGNOSTIC CHECK
Is "DTC 11 CONTROL UNIT" or "DTC 20 CAN COMM CIRCUIT" indicated in the self-diagnosis display item?
YES or NO
- YES: GO TO applicable item inspection. Refer to "DTC 11 CONTROL UNIT ", or "DTC 20 CAN COMM CIRCUIT ".
- NO:
- Replace ICC sensor and adjust laser beam aiming. Refer to "ICC SENSOR ".
- Erase DTC and perform ICC system running test. Refer to "ICC SYSTEM RUNNING TEST ". Then perform self-diagnosis of ICC system again.