Self-Diagnostic Erasing Method
WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- Stop the vehicle and turn the ignition switch OFF.
- Turn ignition switch ON and start self-diagnosis.
- During self-diagnosis mode, press CANCEL switch 5 times, and DISTANCE switch 5 times within a 10 second time period.CAUTION:
- Switch inputs must be received within a 10 second time period.
- When operation is not completed within 10 seconds start again from step 1.
- DTC 55 will be shown.CAUTION: DTC of an existing malfunction will not be erased.
- Turn ignition switch OFF to exit the diagnosis.
- Perform ICC system running test (drive vehicle with ICC system ON), and make sure that ICC system warning lamp (orange) does not illuminate.